VITON O-RING CORD .118" (3.00mm) Diameter 75 Durometer BLACK FREE SHIPPING

Description

Viton® (Fluorocarbon) Fluoroelastomer
O-ring Cord
Cross-section diameter = 0.118" (3.00mm) Actual size
75 Durometer Shore A
By Ruby's Rubber
Color is Black
SOLD BY THE FOOT.
NOTE: Simply put the number of feet you need in the qty box.
Example: To order a 10 ft long piece just put 10 in the qty box and this will get you a 10 ft long piece.
SIZE:  0.118 +/- 0.005" Actual o-ring cross section diameter
DURO: 75+/-5 Shore A
Fluorocarbon rubber has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Low temperature resistance is normally not favorable and for static applications is limited to approximately –15°F (–26°C) although in certain situations it is suitable down to –40°F (–40°C). Under dynamic conditions, the lowest service temperature is between 5°F and 0°F (–15°C and –18°C). Gas permeability is very low and similar to that of butyl rubber. Special fluorocarbon compounds exhibit an improved resistance to acids, fuels, water and steam.
Heat resistance
Up to 400°F (204°C) and higher temperatures with shorter life expectancy.
Cold flexibility
Down to –15°F (–26°C) (some to –40°F (–40°C)).
Chemical resistance
Mineral oil and grease, low swelling in ASTM oil No. 1, and IRM 902 and IRM 903 oils
Non-flammable hydraulic fuels in the group HFD
Silicone oil and grease
Mineral and vegetable oil and grease
Aliphatic hydrocarbons (fuel, butane, propane, natural gas)
Aromatic hydrocarbons (benzene, toluene)
Chlorinated hydrocarbons (trichlorethylene and carbon tetrachloride)
Fuels, also fuels with methanol content
High vacuum
Very good ozone, weather and aging resistance.
Not compatible with:
Glycol based brake fluids
Ammonia gas, amines, alkalis
Superheated steam
Low molecular organic acids (formic and acetic acids).