SimpBMS Tesla BMS For Tesla Model S/X Battery Modules

Description

Documentation and User Manual:
https://github.com/Tom-evnut/SimpBMS
NOTE: SimpBMS Plug and Connector Set included in purchase. SimpBMS 2.4" Touchscreen Display (Image 3) not included, extra.
SimpBMS also works with some other battery modules (BMW i3 Modules, 1st Generation Chevy Volt Modules, Mitsubishi i-MiEV Modules), but must be reprogrammed to work. Send me a message if you will be using the BMS for any of these other modules.
Prices shown on eBay are higher than listed below due to eBay's transaction fees.
Simp
BMS
Tesla
BMS
SimpECO Engineering ©
A DIFFERENT KIND OF BMS
The SimpBMS works differently from other BMSes. Instead of relying on an unpredictable and expensive external balancing system, the SimpBMS utilizes the high-quality OEM Tesla balance boards on each module to monitor for faults and keep the cells balanced. By communicating with the balance boards, the SimpBMS takes advantage of the millions of dollars of research and development that went into developing the Tesla balance boards.
FEATURE-PACKED, EASY TO USE, AND COST EFFECTIVE
At only 9, the SimpBMS significantly undercuts competing BMS systems, especially when working with many modules. With near plug-and-play compatibility, the SimpBMS can be configured to monitor voltage (both at the cell and module level), temperature at each battery terminal, and state-of-charge of your expensive Tesla modules in minutes. Only 4 wires from the balance boards are required to connect the SimpBMS to up to 64 Tesla battery modules: +5v, Ground, and TX and RX signal wires.
EMAIL:
[removed]
USER MANUAL:
FEATURES
PRICING
Supports up to 64 Tesla Model S/X Battery modules
Communication with other components over CANbus
Full contactor control
SimpBMS Board - 9
SimpBMS Connector and Plug Set -
SimpBMS 2.4 inch Touchscreen Display -
64
MAX MODULES PER BMS
0
FULL BMS SETUP
USER INTERFACE
The text-based serial terminal is easy to learn and navigate. The status of your connected modules scrolls continuously, with voltage, temperature, SoC, and current all readily available. Settings are contained in one menu, which can be easily accessed by typing in “s” in the serial interface. Advanced configurability allows you to set balancing voltage to the precision of 0.001v and set parameters for discharge/charge rates, temperature, and charging cutoff. Any serial terminal can be used to set up and monitor the SimpBMS. We recommend Termite by CompuPhase.
All important information can be displayed in real time on the optional 2.4 inch touchscreen display. Wiring up the display is easy with the highly recommended connector and plug set. The SimpBMS also supports analog gauges through 5v or 12v outputs.
Looking for a BMS solution for your Tesla battery modules?
Shoot us an email at [removed]!
© SimpECO Engineering