Epoxy Resin System for Carbon Fiber - Dupont Kevlar - Fiberglass12 oz.

Description

Mix by Weight: 3:1  3oz epoxy to 1oz hardener, scale up as needed.
Tensile Strength:
10,800
Tensile Modulus:
420,000
Flexural Strength:
14,000
Flexural Modulus:
510,000
Barcol Hardness:
84
HDT:
125F
Compression Yield:
15,900
Elongation%:
2.3
50min pot life at 77F (room temp) - Set time approx 5 hours
Viscosity: 1000 (medium)
WINTER WARNING:
Cold temperatures and increased moisture can play havoc with your project. When mixing in the cold months please let the mixed epoxy stand in the mixing cup for a minute or two to allow the exothermic reaction to really kick in. Quickly mixing and pouring out your epoxy can kill this process and impede the quality of your cure.
WARNING:
This product prefers to be mixed in oz quantities, not sub oz CC etc. You can mix at less than oz weight such as cc etc but it takes a little finesse (as we are told). Best result are achieved by weight however on such small quantities if you warm the epoxy to 80F prior to mixing and insure the exotherm kicks in before dumping out you will have no problem. QUICKLY MIXING AND POURING WILL NOT RESULT IN A STRONG EXOTHERMIC REACTION AND THE EPOXY WILL FAIL TO SET. Let the mix sit for a min or two and use laser thermometer or similar.
This epoxy is designed for use with high performance fabrics such as Carbon Fiber, Kevlar/Aramids, Basalt, fiberglass. It has a non-blushing characteristic, low vapor, excellent color, high gloss, excellent resistance to water vapor pressure, excellent U.V. stability and high strength.
Contains optical
enhancers giving it an interesting blue color prior to mix/cure.
All purpose vacuum bagging,  marine, transportation, architectural, and general composites, surf and sailboards, hand lay up applications, gloss coatings and just about anything else that needs to be tough.
Whats Delivered: 9 ounces of epoxy resin and 3 ounces of hardener = 12 ounces. (mix 3 parts epoxy resin to 1 part hardener best results when weighed out)
Instructions Included
*Severe temperature swings such as sitting in a hot/freezing mailbox, delivery vehicle or trailer may change the color of the hardener....this will not effect your end product or the advertised performance ratings as listed in the description.