Competition Electronics Pocket Pro 2 Electronic Shot Timer Blue CEI-4700

Description

The Pocket Pro II timer is an easy to use instrument for measuring shot time intervals and is well suited for personal practice or scoring matches. It fits nicely in your hand with the start button on the side. The powerful 105 dB buzzer transmits well through hearing protection. There is a separate shot sensor and buzzer for best performance. The large buttons are positioned with enough space for big hands. The intuitive menu and navigation is easy to learn and remember. The device automatically turns off after 10 minutes of inactivity. The large clothespin style belt clip fits over your shooting belt. It is powered by one 9 volt alkaline battery, that is not included, for approx. 20 hours of use. 3 configurations of display. Color is Blue.
Features
Color is Blue
3 configurations of display
one 9 volt alkaline battery
automatic power turn down after 10 minutes of inactivity
large clothespin style belt clip
Advanced Features:
- Review four shot at a time with shot numbers, times & splits.
- 3 types of main screens selectable
A) Old Pocket Pro emulation (single number & battery indication).
B) Shot time with shot number, split, 1st shot time, start delay type, time, date & battery condition.
C) Rounds per minute with number of shots, split, 1st shot time, start delay type, time, date & battery condition.
- Set shot dead time to eliminate echoes.
- Digital shot sensitivity adjustment.
- Random start delay minimum and maximums are settable between .5 & 9.9 seconds. Default is minimum 1 second and maximum of 4 seconds per USPSA. Setting min. and max. the same gives a fixed start delay.
About this item
1x 9 Volt batteries required (best with Polaroid 9 Volt batteries),
Color is Blue
Configurations of display ,automatic power turn down after 10 minutes of inactivity
Large clothespin style belt clip
Make sure you are using alkaline batteries.
After 10 minutes, if no shots are detected and no buttons are pressed, the timer will power down automatically.
To wake up the timer, press the SET/ON button
The timer can store up to 99 shots for a given timing cycle.
Subsequent shots will be stored by overwriting the previous value of shot 99.
Shot sensitivity is settable from the SHOT SENSITIVITY screen.
Increase the value for greater sensitivity decrease it for less sensitivity.
To reset factory default values, remove the battery, then hold down the “Start” button and reinstall the battery.
Look at the display to see the message “INIT N/V MEMORY.” Now release the start button.
The maximum timing period is limited to 199.9 seconds. Shots recorded after this will reflect the wrapped time.
The Pocket Pro II measures internally to a resolution of 1 mSec, but shot displays, splits, etc. are internally rounded to the nearest 10 mSec.
For this reason, RPM readings may appear to be inaccurate when manually calculated using the displayed shot string values.
In reality, the RPM reading is actually more accurate than the manual calculation
S
ince it is calculated using the internal shot times, which are measured with 1mSec resolution
Should only be used in temperatures between 32110 degrees Fahrenheit