6v, 12v, 24v Programmable LED Battery level voltage monitor meter indicator J

Description

Use on 6v, 12v, 24v Systems
NEVER be left WITHOUT WARNING that your Bike, Car, Camper, RV, electrical equipment, RC model, or even that battery powering your light in the shed, is going 'Flat'
This versatile unit can be used wherever you have a 24v, 12v or 6v  lead-acid battery or charging system. One wire to battery positive, one to negative. We couldnt have made it simpler.
The tri-colour LED will illuminate in different colours, as per the table below, to show the state of your battery.
15v
13.2v
12.8
12.5
12.1
11.8
11.5
11.2
11
10.7
10.5
1
Red/
Gn Flash
Green
Yellow
Slow Yell
Fast Yell
Red
Red Slow
RedFast
2
Red/
Gn Flash
Green
Yellow
Slow Yell
Red
Red Slow
RedFast
3
Red/
Gn Flash
Green
Green 'Blink'
Yell 'Blink'
Red 'Blink'
Blank (No Display)
4
Red/
Gn Flash
Blank (No Display)
Yellow
Slow Yell
Red
Red Slow
RedFast
5
Red/
Gn Flash
Green
Slow Grn
Green Fast
Yellow
Slow Yell
Fast Yell
Red
Red Slow
RedFast
6
Red/
Gn Flash
Green 'Blink'
Yellow 'Blink'
Red 'Blink'
Blank
One of the 6 operating modes (1 - 6) may be selected by the user at installation time. The default applications are in the below table. The user may select the best mode for their application regardless of suggested use.
1
Battery  Voltage Monitor
‘Standard’ voltage indicator mode. Low distraction, minimum of colour changes in normal operation, suitable for vehicle use, such as motorcycles, cars, boats, campers, etc.
2
Vehicle Charge Indicator
Illuminates Green when under charging conditions, ie vehicle alternator is working. Yellow and red will show if battery is discharging.  IDEAL for on the move battery charge monitoring.
3
Vehicle Monitor (low current sby) Plus ‘Psuedo Alarm Fitted LED’
Great for motorcycles, and vehicles stored long term. When riding/driving  and charging, light will show green. 30 secs after charging stops (vehicle parked) unit will enter low current (500uA) mode to show battery status whilst vehicle in storage. LED will blink green, yellow or red to show stored state battery condition.
Added benefit that LED blinking looks like a vehicle alarm.
Negligable current (0.5mA) drawn from battery.
4
Charge Indicator (Stealth Mode)
Similar to mode (2) but not illuminated under normal charging conditions. IE, LED is blank in normal operation. Yellow and red illuminations will signal charging faults or discharging battery.
5
High Res 10 step voltage monitor
High resolution (Extra display modes) where maximum resolution is important, and colour changes  / flashing in operation are not distracting. (IE not on a vehicle dashboard).
6
Minimal Monitor (Low current)
Simple low current (less than 0.5mA) three colour battery status monitoring. Gentle ‘blink’ every 2 seconds inicates current state.  LED will be blank when battery below 10.5v
When using outdoors, install using sealant as per the included instructions.
We have a no arguments return guarantee.
Check out our Ebay shop for other battery monitor models.
For more information on this unit, search for Gammatronix on the internet to download details.